3D verification
Assembly scene
Interactive assembly scene. Use pointer or touch to orbit and zoom; select parts from the linked sheet, legend, or instructions.
Building exact meshes…
Selected partNone
—Sample demo
"Make me a box"
Enter a brief, optionally add up to 3 reference images, and hit "Generate project"
Examples
Design
Pre-interpreted source
Basic box
Fabrication setup
Start with the material label
Select the label that best matches the sheet you plan to use. Actual thickness may vary slightly.
Selected registered preset
Ready with beginner estimates
3.00 mm sheet thickness · 0.15 mm laser cut width
Starter estimate · physical fit not verified
Preview matches the applied setup.
Preview currently uses
3 mm laser-grade basswood plywood
3.00 mm effective thickness · 0.15 mm across / 0.15 mm down
registered starter thickness · starter cut-width estimate
Optional cut-width fit test
Estimates directional full cut width using the selected material and a recipe you have already tested. It does not calibrate the M2, find a working recipe, prove joint fit, or update the starter preview.
Cut it with the same material, grain orientation, process settings, and support arrangement as the product. Keep xTool Studio Kerf Offset off/0.
Preview
2D fabrication
Sheet projection
Fabrication files
Downloads
Preparing current fabrication files…
Projecting compensated paths…
Cut Score Engrave
Build
Linked identifiers
Parts and sheets
| Mark | Part | Sheet |
|---|
Deterministic sequence
Assembly instructions
Fabricate
Preparing applied xTool Studio handoff…